Target Mini Starter Kit by Vaporesso

[freemexy]

Target Mini Starter Kit by Vaporesso
With the Target Mini, vaporesso declined its Target box, designed like a 80’s joystick, in XS version. Unpacking the kit, it is its small size and design that attracts sympathy. With its 58 mm height, 24 mm width and 36.5 mm depth, its compactness is remarkable.
In this kit, the Target Mini is combined with the Guardian Tank, the new clearomizer by Vaporesso. Are also included two drip-tips, a short and open one for DL inhalation and a tighter one for MTL vaping.
Two ceramic Ccell-GD coil heads are part of the package. One is a subohm SS316L in 0.5 Ω to be used between 20 and 35 W for DL inhalation. The other one in a Kanthal A1 in 1.4 Ω to be used by beginners between 8 and 13 W for MTL. In addition to the traditional user manual one also finds a high quality USB cable.
The Target Mini is equipped with a battery of 1,400 mAh, which is not so bad given the compactness of the box. The autonomy is rather good with the 1.4 Ω Kanthal coil resistance but it is taken down to 3 hours when choosing the subohm option and vaping quite intensely.
Kit_Target_Mini_Vaporesso_Micro_USBA noticeable imperfection is the location of the Mini USB plug at the bottom of the box that requires laying the box on its side when recharging it, despite a very useful passthrough mode that allows vaping while charging. The finish is good but sometimes light with slightly rattling buttons.
The Target Tank chipset offers many possibilities and ease for controlling vaping modes: Power, Temperature control (Ni, Ti, SS316L and TCR). A 2-second push on the “Mode” button switches from one mode to another. The + and – controls adjust the temperature (by steps of 5°C) or the power.